AC repair
Furnace & heating
Heat pumps
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterFurnace Repair in Atlanta, GA
Furnace repair in Atlanta typically costs $150 to $650 for most common fixes, with ignitor replacements running $150 – $300 and blower motor work falling between $350 and $650, parts and labor included. Most repairs are completed in a single visit, often the same day you call. If your furnace is blowing cold air, making grinding sounds, or short-cycling through Atlanta’s damp winter nights, this page tells you exactly what to expect before anyone sets foot in your home.
The reality of Atlanta winters is that they’re mild but sneaky. You might not run your furnace for weeks, then a January cold snap drops temperatures into the 20s, and suddenly a furnace that sat idle since last March refuses to fire. We see this pattern every year across neighborhoods from Buckhead to East Atlanta. When that happens, you need a repair company that gives you a written price before work starts and tells you the name of the technician before they arrive. That’s how we operate at Brandt HVAC Co Atlanta, and it’s the standard we’ve held since 2003 as part of the Threshold Group.
When You Need Furnace Repair
Most furnace failures give you warning signs well before the system quits entirely. Atlanta’s humidity adds a wrinkle, corroding electrical connections and rusting components faster than in drier climates. Here’s what to watch for:
- Your furnace starts and stops every few minutes (short-cycling). This often points to a dirty flame sensor or an overheating limit switch. Left alone, it strains the blower motor and drives up your Georgia Power bill.
- The burner lights, then shuts off within seconds. That’s almost always a dirty or failing flame sensor. It’s one of the most common furnace repairs we handle in Atlanta, and it’s usually a same-day fix.
- Cold air blows from your vents when the heat is on. Sometimes it’s a tripped limit switch or a failed ignitor. Other times the gas valve isn’t opening. Either way, this isn’t a “wait and see” situation when temperatures drop.
- You hear banging, squealing, or a low rumble. A high-pitched squeal usually means a failing blower motor bearing. A bang when the system fires can mean delayed ignition, which can crack a heat exchanger if ignored.
- The furnace runs, but your home never reaches the thermostat setting. Could be a clogged filter, a failing blower, or duct issues. In older Atlanta homes with original ductwork, this is common.
- You smell gas near the furnace. Call us immediately, and don’t run the furnace. Safety first, always. If the odor is strong, leave the house and call your gas utility from outside.
None of these are trivial. A furnace that’s misbehaving is a safety concern as much as a comfort concern, particularly the gas and ignition issues. When you call Heating & Furnace repair at Brandt, we treat every one of these symptoms as a priority.
Our Furnace Repair Process
Here’s exactly what happens when you call us. No surprises, no guesswork, no wondering who’s about to knock on your door.
- You talk to a live person. Not a phone tree, not a voicemail. We answer 24/7, every day of the year. You describe the symptom, and we schedule a visit that works for you.
- You get the technician’s name and photo before they arrive. This is the Threshold Verified standard. Every Brandt technician is background-checked and identity-verified. When the doorbell rings, the person standing there matches the photo we sent.
- The technician diagnoses the furnace and shows you what’s wrong. They’ll explain it in plain language. If the flame sensor is dirty, they’ll show you the carbon buildup. If the ignitor is cracked, you’ll see the crack.
- You get a written price before any work begins. Not an estimate by text, not a verbal “it’ll probably be around.” A line-item written price. You approve it, or you don’t. There’s no pressure either way.
- We complete the repair, test the system, and go over the work. This includes cycling the furnace several times, checking the temperature rise, and verifying the burners are combusting cleanly.
- You receive a written guarantee covering the repair for 365 days. If that same repair fails within a year, the follow-up visit is free. No argument, no fine print, no additional charge. That’s the 365-Day Done Right Promise.
Furnace Repair Pricing in Atlanta
Here’s what you can expect to pay for common furnace repairs in the Atlanta market, based on the work we do week in and week out:
| Repair | Typical Cost Range (parts & labor) |
|---|---|
| Flame sensor cleaning or replacement | $125 – $250 |
| Ignitor replacement | $150 – $300 |
| Pressure switch replacement | $150 – $275 |
| Thermostat replacement | $175 – $400 |
| Blower motor replacement | $350 – $650 |
| Gas valve replacement | $300 – $550 |
| Heat exchanger replacement | $1,200 – $2,500+ |
What moves the price? The age of your furnace, the brand of parts, and whether the issue is isolated or has caused secondary damage. A Carrier or Trane furnace will have different parts pricing than a Goodman or Ameristar unit, though all the brands we service share similar labor considerations. If your furnace is over 15 years old and needs a major component like a heat exchanger, we’ll be straight with you about whether repair or replacement makes more financial sense. Sometimes the honest answer is replacement, and we’ll show you the numbers to back that up.
Every repair starts with a free estimate, which in our case means a real diagnostic visit with a written price. Call (762) 465-4570 and you’ll have a straight answer before you spend a dime.
Key Takeaways
- Most Atlanta furnace repairs run $150 – $650, with ignitors and flame sensors on the lower end and blower motors on the higher end.
- Every repair includes a 365-day written guarantee through the Done Right Promise. If it fails, we return at no charge.
- The technician who arrives at your door is someone you already know by name and photo, verified through the Threshold Standard.
- You always receive a written price before any work starts. Always.
- We answer the phone with a live person 24/7, including Atlanta’s cold-snap weekends and holidays.
Why Atlanta Homeowners Call Brandt for Furnace Repair
Atlanta is a city of older bungalows and newer builds, and the furnace in a 1920s Craftsman in Grant Park has very different needs than one in a 2015 townhome in Midtown. We service all of it, and we service every major residential brand, from Bryant and American Standard to Carrier and Trane. The name Brandt comes from an old word for a firebrand, which is fitting for a company built around keeping homes warm. But the reason people stay with us isn’t the name. It’s that they know exactly who’s coming, exactly what it’ll cost, and exactly what happens if the repair doesn’t hold.
Opening your door to a stranger is a real concern for a lot of people. Parents home alone with young kids. Older homeowners who’ve heard too many stories. Anyone who’s ever looked through a peephole and wondered who’s really on the other side. We built Brandt specifically for those people. You’ll know your technician’s name before they arrive. You’ll see their face. They’ll have a photo ID badge at your door. If someone shows up who you weren’t told to expect, that visit is on us.
FAQs – Furnace Repair
How much does furnace repair cost in Atlanta?
Most furnace repairs in Atlanta cost between $150 and $650 for common issues like flame sensor failures, ignitor replacements, and pressure switch problems. Major component failures like a heat exchanger can run higher. Call (762) 465-4570 for a free diagnostic estimate with a written price before any work starts.
Can you fix my furnace the same day?
In most cases, yes. We keep common parts stocked on our service vehicles, including ignitors, flame sensors, pressure switches, and capacitors. For brands like Bryant, Carrier, and Trane, we can usually complete the repair in a single visit. Call (762) 465-4570 and we’ll give you the earliest available window.
Is it cheaper to repair or replace my furnace?
A repair is almost always cheaper in the short term, but if your furnace is over 15 years old and needs a heat exchanger or blower motor, replacement often makes more financial sense. We’ll show you the numbers for both options and let you decide with all the facts in front of you.
What’s included in the 365-Day Done Right Promise?
Every repair we complete includes a written 365-day guarantee. If the same repair fails within that year, we return and fix it at no additional charge. No argument, no re-diagnosis fee, no fine print. You’ll see the guarantee in writing before you approve any work.
Do you service all furnace brands?
We service all major residential brands, including Bryant, American Standard, Carrier, Trane, Lennox, Goodman, Rheem, York, and Daikin. Our technicians are trained across the full range, and we stock parts for the most common failures on each.
Call Brandt HVAC Co Atlanta for Furnace Repair
When your furnace quits in the middle of an Atlanta night, you want two things: someone who answers the phone, and someone you can trust at your door. You’ll get both with Brandt. Call (762) 465-4570 for a free estimate, or to schedule a diagnostic visit. You’ll talk to a real person, learn the name of your technician before they arrive, and get a written price before any work begins. That’s the Brandt way, and it’s how we’ve operated since 2003.
Written by Devin Marlowe, Owner at Brandt HVAC Co Atlanta, serving Atlanta.